← All guides

Printing stickers: label sizes and printers

Where repair, demo stock and open box stickers print from, how to choose a label size, setting up the browser's print window, and what to check when a sticker comes out wrong.


A repair, a demo unit and an open box unit can each carry a sticker with a QR code. Scanning the code with any phone opens that unit. Stickers print through your browser’s print window at the Label size set in General settings. This guide covers where stickers print from, how to choose a size, how to set up the print window, and what to check when a sticker comes out wrong.

Where stickers print from

  • A repair: Print then Product Sticker on the repair page. The sticker carries the QR code, the repair reference, the customer’s name, the product and the word REPAIR.
  • A demo unit or an open box unit: Show QR on the unit. The sticker carries the QR code, the product, the unit’s code and the words DEMO STOCK or OPEN BOX.

Each opens a preview of the sticker with a Print button, and shows the label size it will print at.

How printing works

RepairStep does not talk to your printer. Print opens the browser’s own print window with the page already set to the chosen label size, and the browser sends it to whichever printer you choose there. This means the label printer has to be installed on the computer you print from, with its maker’s driver, the same as any other printer. If the browser cannot see the printer, neither can RepairStep.

Starting without a label printer

The default label size is a 40 by 60 millimetre sticker printed in the middle of an A4 page, with a thin border to cut along. It prints on any office printer onto plain paper or a full-sheet sticker. It is the way to begin, and enough for a few units a day. A label printer earns its place once stickers are printed many times a day.

Choosing a label size

The size is set once for the whole business and applies to all three kinds of sticker. Three things decide it: the labels your printer takes, the size of the units you stick them on, and how much needs to be readable without scanning.

  • 29 × 62 mm: the smallest. For small units and accessories. The QR code sits on the left with the text beside it.
  • 29 × 90 mm: the same height, longer, so the customer’s name and the product have more room.
  • 51 × 57 mm: a near-square label with everything one line under the other.
  • 62 × 100 mm: room for everything, with a QR code large enough to scan from arm’s length. The size to choose when the printer allows it.
  • 100 × 150 mm: a shipping label, for large boxes and appliances. It shares a roll with courier labels.

Custom size is for any label not on the list.

A custom size

Measure one label in millimetres. Width is across the roll. On a continuous roll, where the printer cuts each label to length, height is the length you want each sticker to be. Then choose the layout by the label’s shape:

  • Tall or square label: the QR code, reference, customer and product, one under the other.
  • Small label: the QR code, reference and customer only. The product line is left off so the rest fits.
  • Wide label: the QR code on the left, text beside it.

The QR code is the part that must come out well. On a label 29 millimetres tall, the wide layout prints a 25 millimetre code; the other two print 19 millimetres. On any label under about 40 millimetres on its short side, choose the wide layout unless the label is nearly square.

Setting up the print window

The first print from a computer needs the print window set up. Most browsers remember the settings for next time.

  1. Printer: choose the label printer. For the A4 default, choose the office printer.
  2. Paper size: it must match the label. The browser proposes the size from your Label size setting, but some printer drivers list their own sizes by name and need the matching one chosen. A wrong paper size is the usual cause of a sticker printing tiny in the corner of a page, or spread across several labels.
  3. Margins: none. Scale: 100 per cent, not fit to page.
  4. Headers and footers: off. RepairStep sets the page margin to zero so the browser has nowhere to print the date and web address, but some print windows still offer the option.
  5. Print one sticker and scan it with a phone. It should open the unit.

When a sticker comes out wrong

  • Tiny, in the corner of a page, or spread over several labels: the paper size in the print window does not match the Label size. Set it to the label.
  • Cut off at an edge: the scale is not 100 per cent, or the label is smaller than the size chosen. Measure the label and compare it with the setting.
  • The QR code will not scan: it is too small for the phone, or printed faint. Move to a larger label or the wide layout, and check the printer’s darkness setting.
  • The printer is not in the list: it is not installed on this computer. Install the maker’s driver, then print again.
  • A blank label comes out, or the cut lands in the wrong place: on a continuous roll, the height in a custom size does not match the cut length set in the printer’s driver. Make them the same.

Who can change the label size

Admins, in General settings. Anyone on the team can print a sticker.